Hammer Section; Disassembling - Makita DTD152 Technical Information

3.3.4. HAMMER SECTION

3.3.4.1. DISASSEMBLING

(28) (27)
(26)
Top of Cam
grooving
on Spindle (23)
(15)
Tweezers
(17-25) (8-16)
Figure 32
(23)
(15)
(17)
Opening for
Steel ball
insertion*
1R045
Figure 33
(23)
(17)
Figure 34
1. Remove Hammer case section (8-28) from Motor section
Figure 32)
(29-33). (See
2. Remove Bearing box complete (28), O ring 40 (27),
Internal gear 51 (26), Hammer section (17-25), Hammer
case complete section (8-16). (See
3. Set 1R045 to Hammer (17).
4. Pull Hammer (17) downward by turning 1R045
counterclockwise.
5. Align the opening for Steel ball insertion* with the top of
Cam grooving on Spindle (23) by turning 1R045.
6. Remove two Steel balls 3.5 (15) with Tweezers or
Magnetic screwdriver.
7. Turn 1R045 clockwise to release Hammer case section.
8. When removing Spindle (23) from Hammer (17), place
Hammer (17) below so that Steel balls 3.5 (15) do not
fall down.
July 2015
Figure 7 Figure 9)
to
17 / 27