Table of Contents
Advertisement
Simrad ES38DD Installation Manual
About the drawings in the drawing file
Relevant drawings related to the installation and/or maintenance of the ES38DD are
provided for information purposes only.
Note
These drawings are provided only for information and planning purposes. Information
may be omitted. Observe the source drawings for additional details.
The drawings are not to scale. Unless otherwise specified, all measurements are in
millimetres. The original installation drawings are available in PDF and/or AutoCad's
DWG format. The original drawings can be downloaded from our website.
https://www.simrad.com
Some drawings and documents are not available from our website. These can be
downloaded from the Simrad Dealer Club.
https://www.simrad.com/sdc
The installation shipyard must provide all necessary design and installation drawings, as
well as the relevant work standards and mounting procedures.
If required, all documents provided by the shipyard for the physical installation of the
ES38DD must be approved by the vessel's national registry and corresponding maritime
authority and/or classification society. Such approval must be obtained before the
installation can begin. The shipowner and shipyard doing the installation are responsible
for obtaining and paying for such approval.
30
341701/B
Advertisement
Table of Contents
