Table of Contents
Advertisement
Simrad ES38DD Installation Manual
Note
The anti-fouling paint will reduce the acoustical performance of the transducer. The
surface roughness of the transducer substrate and the thickness of the paint may also
influence the performance. Kongsberg Maritime cannot be held responsible for any
negative consequences of the anti-fouling paint.
Because some paint types may be aggressive to the polyurethane in the transducer,
consult our list of approved paints. The list can also be found on http://www.simrad.com.
Observe the relevant instructions and safety information provided by the paint
manufacturer.
Related topics
Transducer handling and maintenance, page 12
Approved anti-fouling paints
This is our list of approved antifouling paints for all transducer types. Always refer to
the manufacturer's documentation and data sheets for a complete procedure and for
relevant safety information.
Important
Do not paint the transducer with traditional hull plating paint. Use only the correct
type of approved paint specified.
Do not use high-pressure water, sandblasting, metal tools or strong solvents to clean
the transducer face.
Jotun
•
: Jotun
Manufacturer
•
P.O.Box 2021, N-3248 Sandefjord, Norway
Address:
•
Manufacturer's website
14
:
http://www.jotun.com
341701/B
Advertisement
Table of Contents
