Smooth Surface Is Important - Simrad ES38DD Installation Manual

Split-beam transducer

Hide thumbs Also See for ES38DD:

Table of Contents

Installing the transducer

Smooth surface is important

Make sure that the surface of the transducer face, as well as the plating and putty around

the transducer is as even and smooth as possible. Obstructions on these surfaces will

create problems with turbulent flow, and may cause noise.

Mounting screws or bolts must not be extruding from the transducer or the plating

immediately around it. Obstructions on these surfaces will create problems with

turbulent flow, and may cause noise.

The space around the threaded rods (or mounting bolts) must be filled with a a suitable

filling compound (putty) and/or a locking ring. This is important to secure a firm

installation and a level and smooth surface.

Note

Obstructions on these surfaces will create problems with turbulent flow, and may cause

noise.