Emptying The Bin; Care And Maintenance Instructions; Cleaning The Filter - iRobot Roomba e6 Owner's Manual

Care and Maintenance

Care and Maintenance Instructions

To keep your Roomba ® robot vacuum running at peak
EN
performance, perform the procedures on the following
pages.
There are additional instructional videos in the iRobot HOME
App. If you notice the robot picking up less debris from your
floor, empty the bin, clean the filter, and clean the brushes.
Care and Maintenance Overview
Part Care
Bin Empty after each use
Filter Clean every week
(twice a week if you
have a pet)
Front Castor Clean every 2 weeks
Wheel
Edge- Clean every month
Sweeping (twice a month if you
Brush and have a pet)
Multi-Surface
Brushes
Sensors and Clean once a month
Charging
Contacts
Note: iRobot manufactures various replacement parts and
assemblies. If you think you need a replacement part, please
contact iRobot Customer Care for more information. Ask
Customer Care or visit an authorised iRobot
* Replacement frequency may vary. Parts should be replaced
if visible wear appears.
4 For more information, visit global.irobot.com
Replace* Details
Page 3
Every 2 Page 3
months
Every 12 Page 4
months
Every 12 Page
months 4-5
Page 5
® dealer.

Emptying the Bin

1
Press the bin release
button to remove the bin.
2
Open the bin door to empty the bin.
3
Place the bin back into the robot.

Cleaning the Filter

1
Release the bin. Remove the
filter by grasping both ends
and pulling out.
2
Shake off debris by tapping
the filter against your
household rubbish bin.
Reinsert the filter with the
3
ridged grips facing out.
Place the bin back into
the robot.
Important: The robot will not
run if the filter is not installed
correctly. Replace the filter
every two months.