Table of Contents
Advertisement
This symbol on the battery indicates that the battery must not
be disposed of with unsorted common municipal waste. As the
EN
end-user, it is your responsibility to dispose of the end-of-life
battery in your appliance in an environmentally sensitive manner
as follows:
(1) returning it to the distributor/dealer from whom you
purchased the product; or
(2) depositing it at a designated collection point
The separate collection and recycling of end-of-life batteries at
the time of disposal will help to conserve natural resources and
to ensure that batteries are recycled in a manner that protects
human health and the environment. For more information, please
contact your local recycling office or the dealer from whom you
originally purchased the product. Failure to properly dispose of
end-of-life batteries may potentially result in negative effects on
the environment and human health due to the substances in the
batteries and accumulators. Information regarding the effects
of problematic substances in the battery waste stream may be
found at the following source:
http://ec.europa.eu/environment/waste/batteries/
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Roomba e6 and is the answer not in the manual?
Questions and answers
I keep getting an error message E6 and it says to clean the brushes. I did and the messages continues and machine stops.
To fix the E6 error message on your iRobot Roomba e6 after cleaning the brushes, follow these steps:
1. Check the Brush Installation – Ensure the brushes are correctly reinstalled. Match the shape of the brush pegs with the brush icons in the cleaning head module.
2. Clean the Brush Caps – Remove the brush caps from the ends of the brushes and clear any hair or debris. Reinstall the caps properly.
3. Clear Debris from Pegs – Remove any hair or debris from the square and hexagonal pegs on the opposite side of the brushes.
4. Clean the Charging Contacts and Sensors – Wipe the sensors and charging contacts with a clean, dry cloth. Do not use water or cleaning solution.
5. Check the Vacuum Path – Remove the bin and clear any obstructions from the vacuum path.
6. Follow Audible Instructions – If the Roomba gives a spoken message or troubleshooting alert, follow the instructions provided.
If the error persists after these steps, try restarting the Roomba or checking for further blockages.
This answer is automatically generated