iRobot Roomba e6 Owner's Manual page 10

Cleaning the Full Bin Sensors
1
Remove and empty the bin.
2
Wipe the inner sensors with a clean,
dry cloth.
Washing the Bin
Important:
Do not wash the filter.
Remove the filter before washing the bin.
1
Release the bin, remove the filter,
and open the bin door.
2
Rinse the bin using
warm water.
Note: The
bin is not
dishwasher
safe.
3
Make sure that the bin is completely dry.
Reinsert the filter and place the bin back
into the robot.
Cleaning the Edge-Sweeping Brush
1
Use a coin or small screwdriver to
remove the screw holding the Edge-
Sweeping Brush in place.
2
Remove the Edge-Sweeping Brush,
clean the brush and the brush post, and
then reinstall the brush.
Cleaning the Front Castor Wheel
1
Pull firmly on the front wheel to remove it.
2
Remove any debris from inside the
wheel cavity.
3
Reinstall all parts when finished. Make
sure the wheel clicks back into place.
Axle
Housing
Important: A front wheel clogged with
hair and debris could result in damage to
your floor. If the wheel is not spinning freely
after you have cleaned it, please contact
Customer Care.
Roomba e6 Owner's Guide
®
EN
Wheel
5