Table of Contents
Advertisement
Available languages
Available languages
Care and Maintenance
Care and Maintenance Instructions
To keep your robot running at peak performance, perform the
EN
procedures on the following pages.
There are additional instructional videos in the iRobot Home App.
If you notice the robot picking up less debris from your floor, empty
the bin, clean the brushes, and clean or replace the filter if needed.
Part
Care Frequency
Bin
Wash bin as needed
Filter
Clean once a week (twice
a week if you have a pet).
Do not wash.
Full Bin Sensor
Clean every 2 weeks
Front Caster
Clean every 2 weeks
Wheel
Edge-Sweeping
Clean once a month
Brush and
(twice a month if you
Multi-Surface
have a pet)
Brushes
Sensors and
Clean once a month
Charging
Contacts
Note:
iRobot manufactures various replacement parts and assemblies. If
you think you need a replacement part, please contact iRobot Customer
Care for more information.
* Replacement frequency may vary. Parts should be replaced if visible wear
appears.
5
For more information, visit global.irobot.com
Emptying the Bin
1
Replacement
Frequency*
2
Every 2 months
Every 12 months
Every 12 months
3
Press the bin release
button to remove bin.
Open bin door to empty bin.
Place bin back in the robot.
Cleaning the Filter
1
Remove the bin. Remove the
filter by grasping both ends
and pulling out.
2
Remove debris by tapping
the filter against your rubbish
bin.
3
Reinsert filter with ridged
grips facing out. Place bin
back in the robot.
Important:
The robot will not run if
the filter is not installed correctly.
Replace the filter every two months.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ROOMBA i4 and is the answer not in the manual?
Questions and answers
I need to replace the plug for roomba i4
The context does not provide specific instructions on replacing the plug for the iRobot Roomba i4. However, it suggests inspecting the power cord for visible damage and ensuring it is securely connected. If the power cord or dock is damaged, consider ordering a replacement from iRobot or a verified parts retailer.
This answer is automatically generated
Light comes on and hear chime, but it doesn't start. Once today it said error 43. I've moved the docking station and its charged but won't take off!
Your iRobot Roomba i4 may show a light and chime but not start because it has detected an issue. A red light ring and audio alert indicate a problem. To understand the specific issue, press the CLEAN button for details.
Error 43 is not explained in the provided context.
For further help, check the iRobot HOME App.
This answer is automatically generated