Table of Contents
Advertisement
WARNING: Indicates a hazardous situation that, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a hazardous situation that, if not avoided, could
EN
result in minor or moderate injury.
NOTICE: Indicates a hazardous situation that, if not avoided, could
result in property damage.
GENERAL
WARNING
• Your robot is not a toy. Small children and pets should be
supervised when your robot is operating.
• Do not sit or stand on your robot or Home Base charging station.
• Do not use unauthorised chargers. Use of an unauthorised
charger could cause the battery to generate heat, smoke, catch
fire, or explode.
• Your robot comes with a region approved power supply cord
and is designed to be plugged into a standard household AC
power outlet only. Do not use any other power supply cord. For
replacement cords, please contact Customer Care to ensure
proper selection of country specific power supply cord.
• Do not open your robot or the Home Base charging station.
There are no user serviceable parts inside. Refer servicing to
qualified service personnel.
• Risk of electric shock, use indoors in dry locations only.
• Do not handle your robot and Home Base with wet hands.
• Store and operate your robot in room temperature
environments only.
• If the room to be cleaned contains a balcony, a physical
barrier should be used to prevent access to the balcony
and ensure safe operation.
• Clean Cliff Sensors to remove buildup.
CAUTION
• Be aware that the robot moves on its own. Take care when
walking in the area that the robot is operating in to avoid
stepping on it.
• Do not operate the robot in areas with exposed electrical
outlets in the floor.
• Do not use this device to pick up sharp objects, glass, or
anything that is burning or smoking.
• If the device passes over a power cord and drags it, there
is a chance an object could be pulled off a table or shelf.
Before using this device, pick up objects like clothing, loose
papers, pull cords for blinds or curtains, power cords, and
any fragile objects.
NOTICE
• This robot is intended for dry floor use only. Do not use this
device to pick up spills. Do not allow your robot or Home Base
charging station to become wet.
• Do not place anything on top of your robot.
• The failure to maintain the cleanliness of charger contacts
could result in loss of ability for the robot to charge the battery.
HOME BASE™ CHARGING STATION
WARNING
• Do not use a Home Base with a damaged cord or plug. If the
cord or plug is damaged, it must be replaced.
• Always disconnect your robot from the Home Base before
cleaning or maintaining it.
• If the appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, return it to a
service centre.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Roomba e6 and is the answer not in the manual?
Questions and answers
I keep getting an error message E6 and it says to clean the brushes. I did and the messages continues and machine stops.
To fix the E6 error message on your iRobot Roomba e6 after cleaning the brushes, follow these steps:
1. Check the Brush Installation – Ensure the brushes are correctly reinstalled. Match the shape of the brush pegs with the brush icons in the cleaning head module.
2. Clean the Brush Caps – Remove the brush caps from the ends of the brushes and clear any hair or debris. Reinstall the caps properly.
3. Clear Debris from Pegs – Remove any hair or debris from the square and hexagonal pegs on the opposite side of the brushes.
4. Clean the Charging Contacts and Sensors – Wipe the sensors and charging contacts with a clean, dry cloth. Do not use water or cleaning solution.
5. Check the Vacuum Path – Remove the bin and clear any obstructions from the vacuum path.
6. Follow Audible Instructions – If the Roomba gives a spoken message or troubleshooting alert, follow the instructions provided.
If the error persists after these steps, try restarting the Roomba or checking for further blockages.
This answer is automatically generated