Cleaning the Multi-Surface Brushes
1
Pinch the brush frame release
tab, lift the tab, and remove any
EN
obstructions.
2
Remove the brushes from the
robot. Remove the brush caps
from the ends of the brushes.
Remove any hair or debris that
has collected beneath the
caps. Reinstall the brush caps.
3
Remove any hair or debris from
the square and hexagonal pegs
on the opposite side of the
brushes.
4
Remove the bin from the robot
and clear any debris from the
vacuum path.
5
Reinstall the brushes in the robot.
Match the shape of the brush pegs
with the shape of the brush icons in
the cleaning head module.
6
For more information, visit global.irobot.com
Cleaning the Sensors and Charging
Contacts
1
Wipe sensors and charging contacts with
a clean, dry cloth.
Important:
Do not
spray cleaning
solution or water
onto the sensors or
sensor openings.
Need help?
Do you have a question about the Roomba e6 and is the answer not in the manual?