Table of Contents
Advertisement
User Guide
Service Name
Type
Protocol
Local IP Address
Base Host Port
13.3 Port Forwarding Trigger Ports
To select Port Forwarding Trigger Ports, click on define custom service from the Service Configuration screen,
and then select Trigger Ports from the Custom Service screen. Click on next. The follow settings will be displayed
in the Trigger Ports screen. Enter your values in the Local 'Trigger' Port Range fields and click on next to
continue.
Service Name
Local Trigger Port Range
Global Port Range
030-300381 Rev. A
The NAT service for which you are configuring Port Forwarding.
The type of NAT service configuration you selected.
The type of Protocol that is used to run this NAT service.
TCP- Transmission Control Protocol.
UDP-User Datagram Protocol (UDP).
If a static IP address has been assigned, it will be displayed here.
The port on the WAN that will host the NAT service selected.
The NAT service you selected.
The local LAN side TCP/UDP port.
The WAN side TCP/UDP port range.
102
UltraLine Home DSL Router (Models 7400, 7401)
January 2004
Advertisement
Table of Contents
