Table of Contents
Advertisement
User Guide
12.5.4 Route
The following settings will be displayed if you select Route from the Advanced WAN menu.
To add a Route, enter a Netmask address, or check the Host Route box. Click on the add button to establish a static
route.
IP Interfaces
Address
Netmask
Name
Network Routing Table
Destination Address
Netmask
Gateway
030-300381 Rev. A
IP Interfaces
The list of active interfaces on the Router and their IP address and mask.
Eth0 is the local LAN interface.
Lo0 is the loopback interface.
MainPPP is the main protocol interface.
The IP interface address.
The IP interface netmask address.
The IP interface device name.
Network Routing Table
The list of network routes. These can be either routes for directly connected
interfaces or static routes.
The IP address or subnet of the Route.
If the Route is a network route, netmask is used to specify the subnet mask.
If the Route is a Host route, then the Host Route check box is used.
Indicates were to send the packet if it matches this route.
UltraLine Home DSL Router (Models 7400, 7401)
96
January 2004
Advertisement
Table of Contents
