Table of Contents
Advertisement
User Guide
For example, if you selected the Bridge protocol, the following screen will be displayed. Select a mode from the
options listed in the Mode drop-down arrow under VC 1 – Bridge Settings.
VPI
VCI
PCR
QoS
Protocol
030-300381 Rev. A
VC 1 Configuration
This setting allows you to change your VPI (Virtual Path Indicator) value for a
particular VC, which is defined by your Service Provider.
This setting allows you to change your VCI (Virtual Channel Indicator) value for a
particular VC, which is defined by your Service Provider.
Factory Default = 100%
Peak Cell Rate (PCR)-The maximum rate at which cells can be transmitted across a
virtual circuit, specified in cells per second and defined by the interval between the
transmission of the last bit of one cell and the first bit of the next.
This value is a percentage of the current data rate.
100 allows this VC to use 100% of the available bandwidth.
80 allows this VC to use 80% of the available bandwidth.
Quality of Service, which is determined by your Service Provider.
CBR = Constant Bit Rate
UBR = Unspecified Bit Rate
VBR = Variable Bit Rate
The Protocol for each VC, which is specified by your Service Provider.
PPPoA = Point to Point Protocol over ATM (Asynchronous Transfer Mode)
UltraLine Home DSL Router (Models 7400, 7401)
89
January 2004
Advertisement
Table of Contents
