Table of Contents
Advertisement
User Guide
Max Queue Size
Total Dropped Packets
Total Enqueued Packets
Current Depth
Deepest Depth
Queue Number
Peak Info. Rate (%)
Committed Info Rate (%)
Peak Burst (ms)
Committed Burst (ms)
Total Packets Received
Total Marked Packets
Total Filter Packet Drops
Avg. DSL Bytes Per Packet
Avg. Packet Rate Per second
Queue Number
Not Time Stamped
A ms to B ms
030-300381 Rev. A
The maximum number of packets that can be queued for this priority.
Indicates how many packets of this priority have been dropped by QOS due to
lack of buffer space or filtering rules.
Displays the number of packets, destined for the WAN, that have been
received.
Displays the current number of packets of this priority that are queued.
Displays the most number of packets that have been queued at once for this
priority.
QOS Filter Statistics
The DiffServ Queue. (See Queue Number description above.)
The maximum allowed rate for this priority, expressed as a percentage of the
DSL rate.
The committed rate for this priority, expressed as a percentage of the DSL rate
Displays the interval in milliseconds for averaging the peak offered rate.
Displays the interval in milliseconds for averaging the committed offered rate.
Displays the total number of packets of this priority that are destined for the
LAN.
Displays the number of packets of this priority that exceeded the committed
rate, but not the peak rate, and were marked with a higher drop priority
Displays the number of packets of this priority that exceeded the peak rate and
that were, therefore, dropped.
Displays the average size of packets for this priority, including all overhead.
Displays the average rate (in packets per seconds) for this priority.
QOS Latency Counts
The DiffServ Queue. (See Queue Number description above.)
The packets with no incoming time stamp. (Often these are generated internal
to the Router.)
The number of packets of this priority whose time in the Router fell between A
and B milliseconds. (Time is measured from the point the packet arrives at the
Router's processor until is passed to the ATM hardware for transmission.)
Possible ranges are (A ms to B ms):
0 ms to 10 ms
10 ms to 20 ms
20 ms to 40 ms
40 ms to 100 ms
100 ms to 1000 ms
1000 ms to 3000 ms
Larger than 3000 ms
129
UltraLine Home DSL Router (Models 7400, 7401)
January 2004
Advertisement
Table of Contents
