Table of Contents
Advertisement
User Guide
Peak Information Rte (%)
Committed Information Rate (%)
Peak Burst Size
Committed Burst Size
Max Queue Size
Latency Boundary
Latency Threshold (ms)
IP Fragmentation Enable
IP Fragment Size
If you made changes to the QOS Configuration and clicked on save, the following screen will be displayed. Click
on OK. This will save your new QOS settings.
030-300381 Rev. A
UltraLine Home DSL Router (Models 7400, 7401)
Assured Forwarding (AF2)
Assured Forwarding (AF3)
Assured Forwarding (AF4)
Expedited Forwarding (EF)
Network Control (NC)
The maximum allowed rate for this priority, expressed as a percentage of
the DSL rate.
The committed rate for this priority, expressed as a percentage of the DSL
rate.
The interval in milliseconds for averaging the peak offered rate.
The interval in milliseconds for averaging the committed offered rate.
The number of packets that can be queued for this priority.
Latency Measurements
This configures the maximum latency boundary in milliseconds that a
specific packet may be delayed by.
This setting configures the maximum latency boundary in milliseconds that
a specific packet may be delayed by.
Possible responses are:
Boundary 1:0 ms
Boundary 2:10 ms
Boundary 3:30 ms
Boundary 4:40 ms
Boundary 5:100 ms
Boundary 6:1000 ms
Boundary 7:3000 ms
Factory Default = DISABLED
If this box is checked, IP Fragmentation will be Enabled. If Enabled and
packets larger than 1500 bytes total are received, they will be fragmented.
This is the IP Packet Size.
Possible responses are:
100, 148, 244, 292, 340, 388, or 436
95
January 2004
Advertisement
Table of Contents
