Table of Contents
Advertisement
User Guide
Enter the VPI and VCI values you obtained from your Internet service provider (for example, 0 for VPI and 35 for
VCI). The actual VPI/VCI values may vary according to your ISP. Click on next.
NOTE: Depending on your Internet Service
Provider, the VPI/VCI screen may come
pre-configured and it will be displayed here.
In this case, you should not change any
values in this screen. Click on next to go to
the PROTOCOL screen.
030-300381 Rev. A
UltraLine Home DSL Router (Models 7400, 7401)
32
0
VPI =
35
VCI =
January 2004
Advertisement
Table of Contents
