Table of Contents
Advertisement
User Guide
12.5.5 RIP
The following details will be displayed if you select RIP from the Advanced WAN menu. If you change any
settings in this screen, click on save.
RIP Enable
Interface Type
Receive
Transmit
RIPv2 Authentication Mode
030-300381 Rev. A
Factory Default = DISABLED
If this box is checked, RIP will be Enabled (turned ON).
RIP Configuration
LAN: Select this if you are configuring RIP for the LAN side.
WAN: Select this if you are configuring RIP for the WAN side. (WAN side is
receive only.)
The version of RIP to be accepted.
Possible responses are:
None
RIPv1
RIPv2
RIPv1 or RIPv2
The version of RIP to be transmitted. (WAN side RIP never transmits)
Possible responses are:
None
RIPv1
RIPv1 Compatible
RIPv2
If using RIP V2, you must select the type of authentication to use.
Possible responses are:
None
98
UltraLine Home DSL Router (Models 7400, 7401)
January 2004
Advertisement
Table of Contents
