Table of Contents
Advertisement
User Guide
NOTE: The Router features shown in Figure 2 apply to the Model 7400 product. The Model 7401 product has only
an Ethernet interface.
6.4.3 Installation via 10/100 Base-T Ethernet and USB Simultaneous
Installation (Model 7400)
Model 7400 supports simultaneous use of 10/100 Base-T Ethernet and USB ports. The following instructions
explain how to install your Router for simultaneous use of Ethernet and USB ports.
NOTE: Refer to Figure 1 and Figure 2 for instructions on hardware installation via Ethernet and USB connections.
1. Connect the power supply cord to the power connector marked
other end of the power supply into a wall socket.
2. Connect the DSL phone cable from connector marked
telephone line jack on the wall. You must use the phone cord that was provided with the kit.
030-300381 Rev. A
UltraLine Home DSL Router (Models 7400, 7401)
Figure 2. Connection via USB
on the rear panel of the Router to the DSL-equipped
15
~
on the rear panel of the Router. Plug the
12V
January 2004
Advertisement
Table of Contents
