Table of Contents
Advertisement
User Guide
Service Name
Local IP Address
Global Port Range
Base Host Port
Protocol
Port Forwarding Trigger Ports
To select Port Forwarding Trigger Ports, click on define custom service from the Service Configuration screen
and then select Trigger Ports from the Custom Service screen. Click on next. The follow settings will be displayed
in the Trigger Ports screen. Enter your values in the Local 'Trigger' Port Range fields and click on next to
continue.
Service Name
Local Trigger Port Range
Global Port Range
030-300198 Rev. D
The NAT service you selected.
If a static IP address has been assigned, it will be displayed here.
The Global Port Range will be mapped to host the device beginning at the base host
port. The port range that is provided by the service that you are customizing.
Acceptable values for Global Port Range are 1 to 65535, and the first port must be
less than or equal to the second port.
The port on the WAN that will host the NAT service selected. Acceptable values for
Base Host Port are 0 to 65535, and the first port must be less than or equal to the
second port.
The type of Protocol that is used to run this NAT service.
TCP- Transmission Control Protocol.
UDP-User Datagram Protocol (UDP).
The NAT service you selected.
The local LAN side TCP/UDP port. Acceptable values for Local Trigger Port Range
are 1 to 65535, and the first port must be less than or equal to the second port.
The WAN side TCP/UDP port range. Acceptable values for Global Port Range are
1 to 65535, and the first port must be less than or equal to the second port.
WireSpeed Dual Connect NAT Router
73
March 2003
Advertisement
Table of Contents
