Safety Instructions; Intended Use - schmersal PSC1 Series Installation Manual

Installation manual
PAA
PAE
PES
Pilot duty
Qx.y (1)
T0,T1
TB(1)
PELV
PLC
SD bus (on request)
SDDC (on request)
SELV
SMMC (on request)
SRP/CS
SSI
SW
VDE
Yx.y (1)
(1) Module address
Channel address

3 Safety instructions

3.1 Intended use

The devices in the series PSC1-C-100 are programmable safety controllers for providing
safety shutdown and safety functions. The devices are intended for usage
- In EMERGENCY STOP systems,
- As a safety component in the context of the EC Machinery directive 2006/42/EC,
- As PES for risk reduction in the context of IEC 61508,
- In safety circuits according to IEC 60204-1 and EN 60204-32,
- As PES for functional safety in the context of IEC 62061,
- As SRP/CS in the context of EN ISO 13849,
- As a device for providing safety functions according to IEC 61800-5-2,
- As a logic unit for signal conversion and signal processing in a two-hand circuit
according to EN 574.
HB-37420-810-01-25F-EN PSC1-C-100 Installation manual - V2.2.docx
Version: 25F
Prozessabbild der Ausgänge (Process image of the
outputs)
Prozessabbild der Eingänge (Process image of the inputs)
Programmable electronic control
UL Rating
Digital Output
Pulse outputs
T bus connector (backplane bus)
Protective Extra Low Voltage
Programmable Logic Controller
Serial diagnostic bus for electronic Schmersal safety
switches
Safe Device-Device Communication
Safety Extra Low Voltage
Safe Master-Master Communication
Safety related parts of a control system
Synchronous Serial Interface
Software; here: safety-related application software
Verband der Elektrotechnik, Elektronik und
Informationstechnik e. V.
Auxiliary output
x = 0 ..... 2
y = 0 ..... 39
Page 10 of 201