Camera Id; Sync; Language; Camera Reset - Vanderbilt CCPS1317-LPOIR Configuration

5.11

CAMERA ID

5.12

SYNC

5.13

LANGUAGE

5.14

CAMERA RESET

5.15

SAVE ALL

© Vanderbilt 2016
CAMERA ID displays ON or OFF. The default setting is OFF. You can set the
ON mode to add a camera title up to 26 characters with 2 lines and also select
where the title appears on the monitor screen.
Set the sync mode as INT (internal) or LL (line lock) mode. Choose LL mode and
the submenu is shown as below. You can set phase from 000 to 624. The LL
option is only available with AC power.
Note If the power supply is DC12V, the camera's default setting is INT
mode; if the power supply is AC24V, the camera's default setting is
LL mode.
OSD supports 8 multi built in languages. The default setting is English. Move the
joystick control LEFT or RIGHT to select the ENGLISH /JAPANESE / GERMAN /
FRENCH / RUSSIAN / PORTUGUESE / SPANISH / SIMPLIFIED CHINESE.
Move to the CAMERA RESET mode then Press the ENTER key to recall factory
settings.
Save all settings and exit.
Administration and Configuration
LL
PHASE
RETURN
011
19