Adjusting The Camera Position - Vanderbilt CCPS1317-LPOIR Configuration

Installation and Connection
4.3

Adjusting the Camera Position

© Vanderbilt 2016
Note For static electricity protection, ensure that the rubber pad is placed
inside the mounting bracket base.
1. Loosen the two screws (left and right) first (just rotate slightly one circle or the
screws will fall down).
2. Rotate the Retaining ring then you will be able to hold the camera and adjust
its angle.
3. Fasten the screws and retaining ring to ensure the desired angle.
F 2.3-1
IGURE
F 2.2 C
IGURE ONNECTING THE
F
IGURE
W
IRING
2.3-2
10