Shutter / Agc - Vanderbilt CCPS1317-LPOIR Configuration

Administration and Configuration
5.2

SHUTTER / AGC

© Vanderbilt 2016
Set Shutter speed/AGC (Auto Gain Control) function. The default setting is
AUTO. Move the joystick control LEFT or RIGHT to select AUTO or MANUAL.
SUGGESTED USE:
DC Lens: When using DC lens, it is recommended to set SHUTTER/AGC to
AUTO mode. Enter the AUTO submenu as shown in the figure. Move the joystick
control UP or DOWN to adjust HIGH LUMINANCE MODE to AUTO IRIS.
Manual Lens: When using MANUAL lens, it is recommended to set
SHUTTER/AGC to AUTO mode. Enter the AUTO submenu as shown in the
figure. Move the joystick control UP or DOWN to adjust HIGH LUMINANCE
MODE and LOW LUMINANCE setting.
AUTO IRIS and SHUT+AUTO IRIS difference
 Use DC lens and setting to AUTO IRIS mode for normal condition application
environments. The IRIS level will be controlled by camera brightness.
 Use DC lens and setting to SHUT+AUTO IRIS mode for high light application
environments. The exposure will be controlled by AES or the DC Iris. The
iris level will be controlled by camera brightness.
The shutter speed is variable from 1/50(1/60) sec to the 1/10Ksec and the AGC
is selectable depending on your environment condition.
AUTO SETUP
HIGH LUMINANCE
MODE
BRIGHTNESS
LOW LUMINANCE
MODE
BRIGHTNESS
RETURN
AUTO IRIS
028
AGC
x 0.75
14