White Balance - Vanderbilt CCPS1317-LPOIR Configuration

5.3

WHITE BALANCE

© Vanderbilt 2016
Note: Menu settings for Lens and Shutter/AGC
 When the camera first starts up the menu setting for Lens=Auto (Mode=Auto)
and the settings for Shutter/AGC= High Luminance=Auto Iris
 When you change Lens=Manual then the default settings for Shutter/AGC=
High Luminance=Shut
 When you change Lens=Auto then the settings for
Shutter/AGC=Shut+AutoIris (this is not the default value of menu setting
when first turned on)
WHITE BAL controls color on the screen. The default is ATW. The color
temperature range is 2500°K ~ 9500°K. Move the joystick control LEFT or
RIGHT to select ATW (Auto White Balance), PUSH, PUSH LOCK, USER1,
USER2, Anti CR (Anti Color Rolling Suppression) or MANUAL mode. Enter the
ATW submenu as shown in the figure. Move the joystick control UP or DOWN to
select the desired value. Select ATW (Auto White Balance) when the scene
illumination varies between indoor scenes and outdoor scene lighting.
Note When setting different value of ATW FRAME and application
environment, the color temperature range of white balance will be
changed. The color temperature range of x0.50 of ATW FRAME will
be smaller than x2.00.
MANUAL SETUP
MODE
SHUTTER
AGC
RETURN
ATW
SPEED
DELAY CNT
ATW FRAME
ENVIRONMENT
RETURN
Administration and Configuration
SHUT+AGC
1/50(1/60)
6.00
239
016
x 1.00
INDOOR
15