Table of Contents
Advertisement
Administration and Configuration
5.4
BACKLIGHT
5.5
PICTURE ADJUSTMENT
© Vanderbilt 2016
If MANUAL mode is selected, you can adjust LEVEL from 15 to 73.
If USER1 or USER2 mode is selected, you can adjust B-GAIN and R-GAIN value
from 0 to 255.
If PUSH mode in the appropriate position is selected, the whole area will perform
white balance.
If PUSH LOCK mode in the appropriate position is selected, WHITE BALANCE
will perform once.
If ANTI CR mode in the appropriate position is selected, the whole area will
effectively restrain color cast.
Set Backlight Compensation (BLC) function. The default is OFF. Move the
joystick control LEFT or RIGHT to select OFF, BLC or HLC (Highlight
Compensation) mode. When switching to BLC, the function controls the light
level to overcome severe backlighting conditions. HLC is activated automatically
depending on the shooting condition (detects night and high-luminance)
BLC and HLC are the functions that achieve the brightness of a selected area to
an optimum image level. Due to the intense light coming from the back of objects
in the area expected to view, the auto iris lens tends to close and areas desired
to see become dark and invisible.
Set Picture Adjustment function. Enter PICT ADJUST submenu as shown in the
figure. Move the joystick control UP or DOWN to set picture Brightness, Contrast,
Sharpness, Hue, or Gain value. In addition, you can set MIRROR to the ON
mode to get the picture back to front.
PICT ADJUST
MIRROR
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
GAIN
RETURN
OFF
000
128
128
118
123
16
Advertisement
Table of Contents
