Atr; Motion Detection - Vanderbilt CCPS1317-LPOIR Configuration

5.6

ATR*

5.7

MOTION DETECTION

© Vanderbilt 2016
Set ATR (Adaptive Tone-curve Reproduction) function. The default is OFF. Move
the joystick control LEFT or RIGHT to select the ON mode then enter to the ATR
submenu, in order to optimize LUMINACE and CONTRAST of the image.
*Also known as Wide Dynamic Range. This function expands the video dynamic
range of the camera and improves visibility of images even in high contrast envi-
ronments.
Set Motion Detection function. MOTION DET allows detecting moving objects on
the screen. The default is OFF. Move the joystick control LEFT or RIGHT to
select the ON mode then enter to the MOTION DET submenu. You can set 4
motion areas to detect moving objects and to adjust the motion detection
sensitivity. Use the LEFT/RIGHT functions of the joystick control to set the
sensitivity from 000 to 127.
Switch BLOCK DISP to ON. If something is moving in the area, the image will
show blocks. It is just a warning message to the user. Press the ENTER button
for around 2~3 sec to leave the BLOCK DISP menu.
Administration and Configuration
ATR
LUMINANCE
CONTRAST
RETURN
MOTION DET
DETECT SENSE
BLOCK DISP
MONITOR AREA
AREA SEL
TOP
BOTTOM
LEFT
RIGHT
RETURN
MID
MID
111
OFF
OFF
1/4
000
000
000
000
17