Table of Contents
Advertisement
SYM
Voltage Check
With a digital voltage meter or multi-meter to
measure battery voltage.
Voltage:
Fully charged:
13.0 – 13.2V (at 20? )
Undercharged: Below 12.3 V (at 20? )
CHARGING
Connect the Charger positive (+) to the
battery positive (+) terminal.
Connect the Charger negative (-) to the
battery negative (-) terminal.
Charging
current
Charging time
Warning
l Strictly keep flames away from a charging
battery.
l The charging " ON" / " OFF" is controlled by
the charger' s switch. Do not control the
charging by battery jump wires.
l Turn the charger' s switch " OFF" at first
before or after charging to prevent from
sparks created on the connectors and
explosion.
l To charge a battery must be based on the
battery' s ampere-hour showed on label.
CAUTION
l Quick charge a battery should be used
only in an emergency.
l Make sure the current and charging time
of above description.
l The battery will be damaged by too much
current or too rush charging.
l When finishing charge, it is necessary to
measure voltage after 30 minutes.
After installing the battery, coat the terminals
with clean grease.
Standard
Max.
0.6A
6.0A
5~10H
1H
16. ELECTRICAL EQUIPMENT
16-7
Advertisement
Table of Contents
