9. FINAL DRIVING MECHANISM
SYM
RE-ASSEMBLY OF FINAL DRIVING
Countershaft
Final shaft
MECHANISM
Install final shaft and final shaft driven gear,
countershaft.
Final shaft driven gear
Install the setting pins(2 pins) and new gasket.
Dowel pins
Gasket
Apply with grease onto the oil seal lip of final
driving shaft.
Install the gear box cover and 7 bolts.
(tighten the bolts)
Torque: 0.8~1.2 kgf-m
Install the clutch/sliding driving pulley.
Install the driving pulley, belt and left
crankshaft cover.
Install the rear wheel.
Add gear oil.
Recommended usage: SAE 85W-140
(180 cc: standard capacity)
(170 cc: when replacement)
7 bolts
9-6