Ce Electromagnetic Compatibility (Emc) Conformity; Use In Hazardous Areas - Siemens SITRANS L Series Operating Instructions Manual

Safety notes

2.3 Use in hazardous areas

2.2.5

CE electromagnetic compatibility (EMC) conformity

This equipment has been tested and found to comply with the following EMC standards:
EMC standard
CISPR 11:2009 + A1:2010/EN
55011:2009 + A1:2010, CLASS A
EN 61326:2013 (IEC 61326:2012)
EN61000-4-2:2009
EN61000-4-3:2006 + A1:2008 +
A2:2010
EN61000-4-4:2004 + A1:2010
EN61000-4-5:2006
EN61000-4-6:2010
EN61000-4-8:2010
2.3 Use in hazardous areas
Qualified personnel for hazardous area applications
Persons who install, connect, commission, operate, and service the device in a hazardous
area must have the following specific qualifications:
● They are authorized, trained or instructed in operating and maintaining devices and
systems according to the safety regulations for electrical circuits, high pressures,
aggressive, and hazardous media.
● They are authorized, trained, or instructed in carrying out work on electrical circuits for
hazardous systems.
● They are trained or instructed in maintenance and use of appropriate safety equipment
according to the pertinent safety regulations.
14
Title
Limits and methods of measurements of radio disturbance
characteristics of industrial, scientific, and medical (ISM) radio-
frequency equipment.
Electrical Equipment for Measurement, Control and Laboratory
Use – Electromagnetic Compatibility.
Electromagnetic Compatibility (EMC) Part 4-2: Testing and
measurement techniques – Electrostatic discharge immunity
test.
Electromagnetic Compatibility (EMC) Part 4-3: Testing and
measurement techniques – Radiated, radiofrequency, electro-
magnetic field immunity test 2006 + A1:2008 + A2:2010.
Electromagnetic Compatibility (EMC) Part 4-4: Testing and
measurement techniques – Electrical fast transient/burst im-
munity test.
Electromagnetic Compatibility (EMC) Part 4-5: Testing and
measurement techniques – Surge immunity test.
Electromagnetic Compatibility (EMC) Part 4-6: Testing and
measurement techniques – Immunity to conducted disturb-
ances, induced by radio-frequency fields.
Electromagnetic Compatibility (EMC) Part 4-8: Testing and
measurement techniques – Power frequency magnetic field
immunity test.
Operating Instructions, 05/2019, A5E32337711-AC
SITRANS Probe LR with mA/HART