Connecting; Power; Connecting Sitrans Probe Lr - Siemens SITRANS L Series Operating Instructions Manual

Connecting

5.1

Power

Note
DC terminals
DC terminals shall be supplied from an SELV (Safety Extra Low Voltage) source in
accordance with IEC-1010-1 Annex H.
Note
Insulation
All field wiring must have insulation suitable for rated voltages.
5.2

Connecting SITRANS Probe LR

Unscrew the two lid screws to access the terminal block.
①
②
③
④
SITRANS Probe LR with mA/HART
Operating Instructions, 05/2019, A5E32337711-AC
Lid screw (1 of 2)
Terminal block
Locking collar
Strain relief (or NPT cable entry)
If cable is routed through conduit, use only approved, suitably-sized hubs for waterproof applica-
tions.
5
23