Solatea Detector Odule; T O D E -Isolatea Detector O R Module - Notifier Inertia 1010 Operator's Manual

P 4
AGE
B O
ASIC PERATIONAL
T I A D
O SOLATE ETECTOR
EG: Loop 1 Detector 26
Press
ALTER
STATUS
Enter*
L1D26
The LCD will then ask, "Do you want this point isolated? [Y = YES N = NO] "
Enter*
Y
If you're doing only 1 isolate press
T D -I A D
O E SOLATE ETECTOR
It is strongly recommended before you de-isolate that you first check to see if the detector/module you are about
to de-isolate is currently in alarm by doing a read status on the point. (See Page 10)
Follow the same procedure as Isolating above, except answer when the LCD asks, " Do you want this point
isolated? [Y = YES N = NO]"
Enter*
N
If your doing only one isolate press
CAUTION:
The above serves only as a quick reference guide. This system should only be operated by qualified
professionals. Incorrect operation may result in the systems becoming inoperable. Always notify your
service company before making any attempt to operate the system.
* Please refer to Page 6 for details of how to enter alphanumeric data.
P
ROCEDURES
O M
R ODULE
1
ENTER
> >
Press
ENTER
Press
ENTER
ß
BACK
SPACE
O M
R ODULE
Press
ENTER
ß
BACK
SPACE
C © 2000, N
OPYRIGHT
(CONT)
To exit, otherwise continue with next
device.
To exit, otherwise continue with next
device.
I P L
OTIFIER NERTIA TY TD
1010/2020 O M
PERATORS ANUAL