Thread Tension; Lowering The Feed-Dog; Presser Foot Lifter (Fhs-Free Hand System); Sewing Tips - Bernina Industrial 950 Instruction Manual

Th read tension
The tension for normal sewing work is correct when the
red line corresponds with the mark.
Use the wheel to adjust the tension for special tasks and
1
fabrics.
The upper thread tension will be looser when the figure
1
2.5 is in the centre.
The upper thread tension will be tighter when the figure
. l
7. 5 is in the centre.
Do not forget:
Return the tension to its normal position when special
sewing is completed.

Lowering the feed-dog

Raising the feed-dog
Press the switch to the left.
Presser foot lifter (FHS - Free Hand System)
Most sewing tasks are much easier if both hands can be
used to guide the fabric. The lifter is operated with the
right knee to raise or lower the presser foot, leaving both
hands free to guide the work.

Sewing tips

[ �: � � m iJ
Attaching the lifter
The opening for the lifter
is on the bottom right
front of the machine.
The presser foot is held in
the raised position.
By pressing the lifter
again, the lock is released
and the foot is lowered.
The angle of the presser
foot lifter can be adjusted
to suit the user.
Raise the thread take-up
lever before removing the
work. This releases the
thread which can then be
pulled to the back.
+
Lowering the feed-dog
Press the switch to the
right for darning, embroi­
dery and sewing on but­
tons.
""
----
Setting up the machine
J
0
�
Thread cutter
7