Changing The Presser Foot; Threading The Upper Thread; Bringing Up The Lower Thread - Bernina Industrial 950 Instruction Manual

Setting up the machine

Changing the presser foot

Good sewing results
depend on the correct
choice of presser foot
6
(see page 9).

Threading the upper thread

Raise the presser foot.
Lay the thread in guide A on the back of the machine.
Take it through slit
B,
through the thread take-up lever
the thread guide E on the needle holder clamp to the
needle.

Bringing up the lower thread

�
o
Raise the presser foot
Check that the needle is in
its highest position.
under the thread regulator
C,
and down through
D
Hold the upper thread loosely.
Turn the handwheel towards you until the thread take­
up lever is in its highest position.
Pull gently on the thread to bring the lower thread up
through the hole in the stitch plate.
Take both threads through the left slit in the presser foot
and place to the left side.
Release the presser foot
up
Attach the presser foot
D
®
0
©