PanelIdSettings - Calrec TYPE R Installation Manual

PANEL ID SETTINGS
The 8-way DIP switch on the rear of all SETTING THE ID ON A PANEL
Type R panels is set as an 8-bit binary
representation with the left hand
switch used for the most significant
bit, and the right hand switch for
the least significant bit. A switch in
the down/off position represents a
binary 0 and a switch set in the up/
on position represents a binary 1.
Each switch/binary-bit equates to a
decimal value, starting at 1, for the
least significant bit. The remaining
switches are double the value of their
less significant neighbour, making the
8th/most significant bit equate to a
decimal value of 128.
AllPanelIDswitchesareorientatedthe
sameway.RefertotheCalreclabellingon
thesurroundingpanelwhichwillshowthe
mostsignificantbitswitchontheleftand
thebinary1positionasup.
63