UploadControlLayoutsToTheSoftPanels; CreateLayoutsWithTypeRSoftPanelDesigner - Calrec TYPE R Installation Manual

10. UPLOAD CONTROL LAYOUTS TO THE SOFT PANELS
Type R systems come with a selection of
Soft Panel layout files already available.
1. To upload a layout file to a Soft Panel,
navigate to Showsetup then Soft
panellayout in Assist.
2. Select the panel in the list on the left
side, then select a layout file in the
table on the right side.
3. Click Apply. The layout will be
immediately applied to the panel
4. Repeat this process for each Soft
Panel in your surface
Please refer to the TypeRAssistand
ConsolePanelOperation manual for
more information on Type R Soft Panel
Layouts.
11. CREATE LAYOUTS WITH TYPE R SOFT PANEL DESIGNER
To create your own Soft Panel Layouts,
the TypeRSoftPanelDesigner
application is required. This can be
downloaded from http://ftp.calrec.com
Please login using the case-sensitive
credentials below:
Account: TypeR
Password: tYoarEdQ
Please refer to the TypeRSoftPanel
Designer manual for more information
on the Type R Soft Panel Designer
application.
TYPE R SOFT PANEL SOFT PANEL LAYOUT ASSIST PAGE
TYPE R SOFT PANEL DESIGNER INTERFACE
23