Table of Contents
Advertisement
14. Put the new battery label on the front of the RAID controller, over the old battery
15. Write the battery replacement information on the label on the front of the new
16. Dispose of the used battery CRU according to local and federal regulations, which
60
IBM FAStT200 and FAStT200 HA Storage Servers Installation and User's Guide
label. The location of the battery label is shown in the following illustration.
Ethernet address label
Levers
RAID controller CRU.
• Date of Installation – Write today's date
• Replacement Date – Write the date three years from now
CAUTION:
Use proper facilities to recycle the used battery CRU. If the battery CRU is
physically damaged or leaking electrolyte gel, do not ship it to a recycling
center. The battery contains sealed lead-acid batteries that might be
considered hazardous material. You must handle this unit in accordance
with all applicable local and federal regulations.
might include hazardous material handling procedures.
Battery-access panel (on bottom)
Battery label
CONTAINS
SEALED LEAD
BATTERY.
BATTERY
MUST BE
RECYCLED.
Pb
Advertisement
Table of Contents
