Page 1
NANOPTIX – EZTEAR PRINTER PRINT HEAD CLEANING INSTRUCTIONS June 2005...
Page 2
CLEANING THE PRINTHEAD Note: Under normal operating conditions, the minimum interval for cleaning the thermal print head should be 5km of paper. 1. Disconnect power, open printer door and vacuum access dust and ashes that may have accumulated. 2. Clean the roller with a cotton swab and isopropyl alcohol.
Page 3
3. Clean the print line (black line on the print head) with a cotton swab and isopropyl alcohol. • Expanded View • Close Up View...
Page 4
Many cleaning products are available from Nanoptix Inc. Cleaning Cards: Each card is conveniently pre-saturated and sealed in foil to ensure a clean card and the proper amount of solution for each cleaning. Cleaning Wipes: Pre-saturated lint free wipes for multiple technical cleaning uses. Non-smearing, quick drying, and easy to use.