TP-Link Easy Smart Switch User Manual page 58

Configuring VLAN
■ Create VLAN 3. On Switch A, add port 3 and port 4 of Switch A to VLAN 3, while on
Switch B, add port 1, port 3 and port 4 to VLAN 3.
■ Configure the default VLAN 1 to make sure the router can communicate with all ports of
the two switches.
Table 5-1 and 5-2 show configurations of VLANs on each switch.
Table 5-1 Relationships of Ports and VLANs on Switch A and Switch B.
Switch
Switch A
Switch B
Table 5-2 Settings of Egress Rule and PVID on Switch A and Switch B
Switch
Switch A
Switch B
Note:
If a port is connected to terminal devices like computers, add the port to the corresponding VLANs
as an untagged port, because terminal devices typically do not support VLAN tags.
Ports in VLAN 1
2, 3, 4
1, 2, 3, 4
Port
2
3
4
1
2
3
4
Configuration Example for 802.1Q VLAN
Ports in VLAN 2
2, 4
1, 2 ,4
Egress Rule
Untagged
Untagged
Tagged
Untagged
Untagged
Untagged
Tagged
Ports in VLAN 3
3, 4
1, 3, 4
PVID
2
3
1
1
2
3
1
User Guide 54