TP-Link Easy Smart Switch User Manual page 33

Switching
Note:
●
●
●
●
●
It is recommended to configure the LAG function before configuring the other functions
for the member ports.
Ensure that devices on both ends of the aggregation link use the same number of physical
ports with the same speed and duplex mode, flow control setting and QoS setting.
Mirroring and mirrored ports cannot be added to an LAG group.
The maximum of LAG groups varies among different devices. To check the maximum of
LAG groups, refer to the actual web interface.
Each LAG group has 2 port members at least and 4 port members at most.
Configuring LAG
User Guide 29