Appendix: Default Parameters - TP-Link Easy Smart Switch User Manual

6

Appendix: Default Parameters

Default settings of QoS basic configuration are listed in the following table.
Table 6-1
Parameter
QoS Mode
Priority Queue
Default settings of Bandwidth Control configuration are listed in the following table.
Table 6-2
Parameter
Ingress Rate (Kbps)
Egress Rate (Kbps)
Default settings of Storm Control configuration are listed in the following table.
Table 6-3
Parameter
Status
Total Rate (Kbit/sec)
Default Settings of QoS Basic Configuration
Default Settings of Bandwidth Control Configuration
Default Settings of Storm Control Configuration
Default Setting
DSCP/802.1P Based
1 (Lowest)
Default Setting
Unlimited
Unlimited
Default Setting
Disable
Unlimited