Appendix: Default Parameters - TP-Link Easy Smart Switch User Manual

Configuring PoE (Only for Certain Devices)
4

Appendix: Default Parameters

Default settings of PoE Config are listed in the following table.
Table 4-1 Default Settings of PoE Config
Parameter
Global Config
System Power Limit
Port Config
PoE Status
Startup Delay
Interval
Default settings of PoE Auto Recovery are listed in the following table.
Table 4-2 Default Settings of PoE Auto Recovery
Parameter
Global Config
PoE Auto Recovery
Port Config
Ping IP Address
Startup Delay
Interval
Failure Threshold
Break Time
Status
Default Setting
150.0 W
Enabled
Low
Class 4
Default Setting
Disabled
None
60 seconds
60 seconds
5
15 seconds
Disabled
Appendix: Default Parameters
User Guide 79