Print Mode - SATO CL4NX Operator's Manual

4 Operation and Configuration

Print Mode

Printing > Print Mode
Set the print mode.
The options are as follows:
• Continuous: Print the specified number of media. The media remains
in position for printing at all times.
• Tear-Off: After printing the specified number of media, the printer feeds
the last printed media so that it is fully extended out of the printer's front
for removal. After printing, tear off the media manually.
• Cutter: Cut each media while printing the specified number of media.
You can specify this option only if you have installed the cutter unit.
• Cut & Print: Cut the last printed media while printing media with next
data. If next data is not received within the period specified in Eject Cut,
the printer will feed the media to the cut position and cut the last printed
media. You can specify this option only if you have installed the cutter
unit.
• Dispenser: Peel the liner from the printed label as it is advanced to the
printer's front. Once the printed label has been removed from the
printer for application, the next label will retract and position itself for
printing. You can specify this option only if you have installed the
dispenser unit.
• Linerless (CL4NX only): Cut each label while printing the specified
number of labels. You can specify this option only if you have installed
the linerless kit.
<CL4NX>
If no option is installed, Continuous and Tear-Off are available in the
Print Mode menu.
If the optional cutter unit is installed, Continuous, Tear-Off, Cutter and
Cut & Print are available in the Print Mode menu.
If the optional dispenser unit is installed, Continuous, Tear-Off and
Dispenser are available in the Print Mode menu.
If the optional linerless kit is installed, only Linerless is available in the
Print Mode menu.
<CL6NX>
If no option is installed, Continuous and Tear-Off are available in the
Print Mode menu.
If the optional cutter unit is installed, Continuous, Tear-Off, Cutter and
Cut & Print are available in the Print Mode menu.
If the optional dispenser unit is installed, Continuous, Tear-Off and
Dispenser are available in the Print Mode menu.
Note
You cannot set the Print Mode if Auto-mode is Enabled.
78
CL4NX/CL6NX Operator Manual