Protect The Network From Cyber Attacks; Access Control - TP-Link Archer AX11000 User Manual

Chapter 9
9 1

Protect the Network from Cyber Attacks

The SPI (Stateful Packet Inspection) Firewall protects the router from cyber attacks
and validate the traffic that is passing through the router based on the protocol. This
function is enabled by default.
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2 Go to Advanced
If necessary, deselect corresponding checkbox and click SAVE.
9 2

Access Control

Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
How can I
do that?
> Security > Firewall. It's recommended to keep the default settings.
Block or allow specific client devices to access my network (via
wired or wireless).
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or
the password you set for the router.
2 Go to Advanced
3 Select the access mode to either block (recommended) or
allow the device(s) in the list.
To block specific device(s):
1 ) Select Blacklist
2 ) Click Add to view the
> Security > Access
and click SAVE.
Online Devices
Network Security
Control.
list.
44