TP-Link Archer AX11000 User Manual page 21

Chapter 4
parameters are needed according to the secondary connection you have
chosen.
5 ) If you choose PPTP, enter the
secondary connection (Dynamic IP or Static IP) provided by your ISP. Different
parameters are needed according to the secondary connection you have
chosen.
5. Click Save.
Tips:
• If your internet connection type is
• If you use Dynamic IP and
please go to Advanced >
• If you still cannot access the internet, refer to the
BigPond Cable, please go to
PPPoE and you are provided with any other parameters that are not required on the page,
Network > Internet to complete the configuration.
FAQ
Username and Password, and choose the
Advanced > Network
section for further instructions.
Set Up Internet Connection
> Internet to set your router.
17