TP-Link Archer AX11000 User Manual page 24

Chapter 4
3 ) PPPoE: By default, the router uses the IPv4 account to connect to the IPv6
server. Click
Click SAVE and then click CONNECT.
Note: If your ISP provides two separate accounts for the IPv4 and IPv6 connections, please untick the
same session with IPv4 connection
connection.
4 ) 6to4 Tunnel:
connection type
to input further information if your ISP requires. Click
CONNECT.
5 ) Pass-Through (Bridge):
Advanced Settings to input further information if your ISP requires.
checkbox and manually enter the username and password for the IPv6
An IPv4 internet connection type is a prerequisite for this
(Manually Set Up Your Internet
Click Save
Set Up Internet Connection
Connection). Click
and skip to Step 6.
PPPoE
Advanced
SAVE and then click
20