Table of Contents
Advertisement
Chapter 13
13 1
Protect the Network from Cyber Attacks
The SPI (Stateful Packet Inspection) Firewall protects the router from cyber attacks
and validate the traffic that is passing through the router based on the protocol. This
function is enabled by default.
1
Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2
Go to
Advanced
13 2
Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Deny List) or a list of allowed
devices (Allow List).
I want to:
Block or allow specific client devices to access my network (via wired or wireless).
How can I do that?
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2 Go to
Advanced
3 Click
Change
Mode, and select the access mode to either block (recommended) or
allow the device(s) in the list.
To block specific device(s):
1 ) Make sure your current Access Control mode is
Mode, select Deny List and, click CHANGE.
>
Security
> Firewall. It's recommended to keep the default settings.
>
Security
>
Access
Control.
Deny
Network Security
List. If not, click
Change
68
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer BE400 and is the answer not in the manual?
Questions and answers