TP-Link Archer AX11000 User Manual page 84

1 ) If you see the message
this is usually because windows configuration utility is disabled or you are
running another wireless configuration tool to connect the wireless.
2 ) Exit the wireless configuration tool (the TP-Link Utility, for example).
3 ) Select and right click on
Computer Management window.
4 ) Expand Services and Applications
Configuration
5 ) Right click Wireless Zero
6 ) Change Startup type
Service status is Started. And then click OK.
If you can find other wireless network except your own, please follow the steps below:
• Check the WLAN LED indicator on your wireless router/modem.
• Make sure your computer/device is still in the range of your router/modem. Move it
closer if it is currently too far away.
• Go to Advanced >
Double check your Wireless Network Name and SSID is not hided.
If you can find your wireless network but fail to connect, please follow the steps below:
• Authenticating problem/password mismatch:
1 ) Sometimes you will be asked to type in a PIN number when you connect to
the wireless network for the first time. This PIN number is different from the
Wireless Password/Network Security Key, usually you can only find it on the
label of your router.
2 ) If you cannot find the PIN or PIN failed, you may choose
security key
Key.
Windows cannot configure this wireless
My Computer
in the Services list on the right side.
Configuration, and then select Properties.
to Automatic, click on Start button and make sure the
Wireless > Wireless
instead, and then type in the
on desktop, select
> Services, find and locate
Settings, and check the wireless settings.
Wireless Password/Network Security
connection,
Manage to open
Wireless Zero
Connecting using a
80