TP-Link Archer AX11000 User Manual page 60

Chapter 11
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
Note: Before you enable VPN
static IP address for router's WAN port and synchronize your
3. In the Client IP Address
leased to the devices by the PPTP VPN server.
4. Click Advanced to set the PPTP connection permission according to your needs.
• Select Allow Samba (Network Place) access
your local Samba server.
• Select Allow NetBIOS passthrough
Samba server using NetBIOS name.
• Select Allow Unencrypted connections
your VPN server.
5. Click Save.
6. Configure the PPTP VPN connection account for the remote device, you can create
up to 16 accounts.
1 ) Click Add.
2 ) Enter the Username
Server.
VPN Server > PPTP VPN, and select
Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
filed, enter the range of IP addresses (up to 10) that can be
and Password
Enable VPN
System Time with internet.
to allow your VPN device to access
to allow your VPN device to access your
to allow unencrypted connections to
to authenticate devices to the PPTP VPN
VPN Server
Server.
56