TP-Link Archer AX11000 User Manual page 72

Chapter 12
How can
I do that?
LAN: 192.168.0.1
1 Change the routers' LAN IP addresses to two different IP
addresses on the same subnet. Disable Router B's DHCP
function.
2 Visit http://tplinkwifi.net, and log in with your TP-Link ID or
the password you set for Router A.
3 Go to Advanced >
4 Click Add and finish the settings according to the following
explanations:
Network Destination:
to assign to a static route. This IP address cannot be on the same
subnet with the WAN IP or LAN IP of Router A. In the example,
the IP address of the company network is the destination IP
address, so here enter 172.30.30.1.
Subnet Mask: Determines the destination network with the
destination IP address. If the destination is a single IP address,
enter 255.255.255.255; otherwise, enter the subnet mask of
the corresponding network IP. In the example, the destination
network is a single IP, so here enter 255.255.255.255.
Customize Your Network Settings
Router A
Router B
LAN: 192.168.0.2
Switch
PC
192.168.0.100
Network > Static Routing.
The destination IP address that you want
Company's server
WAN: 172.30.30.100
172.30.30.1
68