Specify Wireless Settings - TP-Link Archer AX11000 User Manual

Chapter 12
Done!
12 7

Specify Wireless Settings

The router's wireless network name (SSID) and password, and security option are preset
in the factory. The preset SSID and password can be found on the label of the router.
You can customize the wireless settings according to your needs.
Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the
router.
¾ To enable or disable the wireless function:
1. Go to Wireless.
2. The wireless radio is enabled by default. If you want to disable the wireless function
of the router, just untick the
will be invalid.
¾ To change the wireless network name (SSID) and wireless password:
1. Go to Wireless.
Default Gateway: The IP address of the gateway device to which
the data packets will be sent. This IP address must be on the
same subnet with the router's IP which sends out data. In the
example, the data packets will be sent to the LAN port of Router
B and then to the Server, so the default gateway should be
192.168.0.2.
Interface: Determined by the port (WAN/LAN) that sends out
data packets. In the example, the data are sent to the gateway
through the LAN port of Router A, so
Description: Enter a description for this static routing entry.
5 Click SAVE.
6 Check the Routing Table
you've set, the static routing is set successfully.
Open a web browser on your PC. Enter the company server's IP
address to visit the company network.
Enable checkbox. In this case, all the wireless settings
Customize Your Network Settings
LAN should be selected.
below. If you can find the entry
69